Pyrolysis Plant in Canada

Beston pyrolysis plant in Canada is helpful to reduce waste and create valuable products. This machine is used to recycle waste tyre, plastic rubber and oil sludge. After hours of pyrolysis, waste can be converted into valuable pyrolysis oil, carbon black and gas. The whole process is environmental-friendly and profitable. If you’re considering investing in a pyrolysis plant in Canada, here is some information you need to know.

Beston Pyrolysis Plant for Sale in Canada

Brief Introduction of Pyrolysis Plant in Canada

Pyrolysis plant in Canada is an ideal solution to recycle waste and produce valuable fuel oil. Pyrolysis technology refers to putting waste materials into pyrolysis reactor, which is an environment with poor oxygen and high temperature.  During the pyrolysis process, the organic material is heated in a reactor vessel, which causes it to break down into smaller molecules. The volatile organic compounds are released as vapors, which are then condensed into fuel oil.

Pyrolysis technology has gained popularity as a sustainable way to manage waste and produce renewable energy and chemicals. It has several advantages over traditional waste management methods, including reducing greenhouse gas emissions, conserving natural resources, and minimizing waste disposal in landfills.

Raw Materials for Pyrolysis in Canada

Waste Tire in Canada

Waste Tyre

  • Car tires;
  • Truck tires;
  • Bicycle tires;
  • Motorcycle tires;
  • Aircraft tires;
  • Agricultural tires;
  • Off-road tires;
  • Industrial tires;
  • ATV tires;
  • Lawnmower tires;

Waste Plastic in Canada

Waste Plastic

  • Polyethylene (PE) – including high-density polyethylene (HDPE) and low-density polyethylene (LDPE);
  • Polypropylene (PP);
  • Polystyrene (PS);
  • Polyethylene terephthalate (PET);
  • Polyvinyl chloride (PVC);

Oil Sludge in Canada

Oil Sludge

  • Tank bottom sludge;
  • Drilling mud sludge;
  • Crude oil sludge;
  • Refinery sludge;
  • Waste oil sludge;
  • Oil-contaminated soil;
  • Refinery waste.

Final Products and Application of Pyrolysis Business in Canada

Pyrolysis Fuel Oil

Pyrolysis oil has a lower carbon footprint compared to fossil fuels, as it is derived from renewable sources. Pyrolysis oil can be used as fuel in boilers, furnaces, and engines to generate heat and electricity. It has a high energy content and can replace fossil fuels, reducing greenhouse gas emissions and promoting sustainable energy production. You can find a lot of pyrolysis oilbuyers on Facebook.

Get Pyrolysis Fuel Oil in Canada

Carbon Black

Carbon black can improve the strength, durability, and resilience of rubber products. It is also used as a pigment in inks, paints, and other coatings. Another advantage of carbon black is its electrical conductivity. This makes it useful in the production of electronic components such as batteries, conductive plastics, and wire and cable insulation.

Get Carbon Black in Canada

Combustible Gas

Combustible gas is purified and recycled to heat tire pyrolysis system. Canada investors don’t need to pay more for the fuel cost. Combustible gas can provide economic benefits by reducing the cost of energy and feedstocks in the pyrolysis process. Overall, the use of combustible gases in pyrolysis processes can improve the efficiency and sustainability of the process, while also providing economic benefits.

Get Combustible Gas in Canada

Choose Suitable Pyrolysis Plant for Sale in Canada

Pyrolysis plant in Canada is a considerable business, because of the benefits of recycling waste and producing valuable products. Here are some tips to consider before choosing suitable pyrolysis plant in Canada.

Capacity: The capacity of the pyrolysis plant should match your processing needs. Determine how much waste material you will be processing and choose a plant with a suitable capacity.

Type of Waste: Pyrolysis plants are designed to process different types of waste materials such as plastic, rubber, and oil sludge. Choose a continuous pyrolysis plant that is specifically designed to process the type of waste material you will be working with.

Quality of Equipment: Look for a pyrolysis plant that is made with high-quality materials and components. This will ensure that the plant is durable and efficient.

Safety: The pyrolysis process involves high temperatures and can be dangerous if proper safety measures are not taken. Look for a plant that has safety features such as automatic shut-off systems and alarms.

Environmental Compliance: Continuous waste tyre pyrolysis plants can have an impact on the environment. Look for a plant that meets environmental regulations and has features such as emissions control systems.

Parameters of Beston Pyrolysis Plant for Sale in Canada

Capacity1-3t/d4-6t/d8-10t/d12-16t/d8t/d (only for rubber powder)30-35t/d
Working ProcessBatchBatchBatchBatchSemi-continuousFully continuous
Reactor Sizeφ1400*4900mmφ2200*6000mmφ2600*6600mmφ2800*7100mmφ2800*7100mmφ1800*18500mm
Reactor MaterialQ345RQ345RQ345RQ345RQ345R310S stainless steel
Drive System350 reducer+4kw drive motor400 reducer+5.5kw drive motor400 reducer+5.5kw drive motor500 reducer+7.5kw drive motor500 reducer+7.5kw drive motorZQH650-50 reducer+15kw frequency conversion motor
Land (L*W*H)18m*4.2m*6m30m*12m*8m30m*13m*8m33m*13m*8m33m*13m*8m70m*20m*10m
Burner2*200,000 kcal2*300,000 kcal2*300,000 kcal2*400,000 kcal2*400,000 kcal2.5 million kcal per set
Total Weight of Shipped MaterialsAbout 18tAbout 24.5tAbout 28tAbout 34.5tAbout 34.5tAbout 150t
Number of Containers1*40HQ1*40FR+1*40HQ+1*20 GP1*40FR+2*40HQ1*40FR+2*40HQ1*40FR+2*40HQ25m*8m bulk cargo+8*40HQ
Noise (dB)≤60≤60≤60≤60≤60≤60
Heating MaterialsFuel oil (including tyre/plastic pyrolysis oil), natural gas, LPG, diesel, etc.
Condensing SystemVertical Condenserφ426*3000
Single piece condensing area
Single piece condensing area
Single piece condensing area
Single piece condensing area
Single piece condensing area
2 sets of vertical condenser
3-in-1 Condenser3000*2200*2250
Condensing area
Condensing area
Condensing area
Condensing area
Condensing area

BLJ-3 Pyrolysis Plant for Sale in Bangladesh
BLJ-3 Pyrolysis Plant for Sale in Bangladesh
BLJ-3 Pyrolysis Plant to Paraguay
BLJ-3 Pyrolysis Plant to Paraguay

BLJ-6 Pyrolysis Plant for in Zimbabwe
BLJ-6 Pyrolysis Plant for in Zimbabwe
BLJ-10 Pyrolysis Plant in Chile
BLJ-10 Pyrolysis Plant in Chile

BLJ-16 Pyrolysis Plant for Sale in Morocco
BLJ-16 Pyrolysis Plant for Sale in Morocco
BLL-16 Pyrolysis Plant Installed in China
BLL-16 Pyrolysis Plant Installed in China

Challenge and Solution of Pyrolysis Business in Canada

Pyrolysis has gained attention as a potential solution to reduce waste and greenhouse gas emissions in Canada. However, like any business, pyrolysis also faces challenges. But don’t worry, Beston Group has perfect solutions to each challenge.

Challenge: Capital Cost and Market Demand

One of the significant challenges in starting a pyrolysis business in Canada is the high cost of tyre pyrolysis plant. The pyrolysis equipment and infrastructure required to process waste into useful products can be expensive. Additionally, there is uncertainty about the market demand for the resulting products. While there is potential for bio-oil and other products, there is no guarantee of steady demand.

Solution: Government Funding and Market Research

To overcome the high capital cost, pyrolysis companies can seek government funding or loans to help cover the initial investment. Additionally, conducting market research to identify potential customers and demand for the resulting products can help pyrolysis companies make informed decisions about their business strategy.

Challenge: Regulatory Compliance and Concerns

Pyrolysis produces emissions, such as particulate matter, greenhouse gases, and volatile organic compounds. To ensure the safety of workers and the environment, pyrolysis companies must comply with regulations and obtain permits. There is also concern about the environmental impact of pyrolysis, including the disposal of waste streams generated during the process.

Solution: Adherence to Regulations and Standards

To address regulatory compliance and environmental concerns, pyrolysis companies must adhere to regulations and obtain the necessary permits. This may require investment in pollution control equipment and training for employees to ensure compliance. Additionally, companies can explore innovative ways to dispose of waste streams generated during the pyrolysis process, such as through recycling or repurposing.

Challenge: Competing with Traditional Methods

Pyrolysis is still a relatively new technology in Canada, and traditional waste management methods, such as landfilling and incineration, are still prevalent. These methods are often cheaper and more established, making it challenging for pyrolysis companies to compete.

Solution: Education and Partnerships

To compete with traditional waste management methods, pyrolysis companies can invest in education and outreach to raise awareness about the benefits of their technology. Additionally, forming partnerships with municipalities and waste management companies can help pyrolysis companies gain access to waste streams and customers.

In conclusion, pyrolysis has the potential to be a valuable solution for waste management and reducing greenhouse gas emissions in Canada. However, like any business, pyrolysis also faces challenges that must be addressed. By seeking government funding, conducting market research, adhering to regulations, and forming partnerships, pyrolysis companies can overcome these challenges and build a successful businesses.

Pyrolysis Plant Business Has Bright Future in Canada
Pyrolysis Plant Business Has Bright Future in Canada

Contact Us

The following items will help you identify key information about your project, which will enable us to work on a competitive solution proposal.

Please specify your requirement by referring to the following aspects:

1- What kind of solution will meet your demand? (Key point)
2- What kind of material and expected end product are you planning to have?
3- When is the project supposed to be running? (Key info for A-Z project programming)
4- Budget for machinery purchasing? (Key info for right model)
5- Points that you really focus on. (Customized service from our project consultant)